• Hydraulic Pressbrakes
• Hydraulic Bending Rolls
• Drilling Machines
• Drilling Accesories
• Mandrel Bending Machines
• Crimping Machines
• Milling Machines
• Pneumatic Forging Hammer
• Profile Bending Machines
• Cutting Machines
• Grinding machines
• Cutting and Slitting Machines
• Sheet Metal Cutting
• Universal Bending Machines

• Catalogue
• Partners
• General Terms of Business

Model ZS 170N and ZS 200N.
Specially for milling of Alluminum profiles.

Technical data and equipment:
These two models difference is the sawblade diameter (max. 520mm). The maximum depth of cut at 90° is 200mm and the length of cut at 90° is 450mm.

Well-proven machine in aluminium construction.


Technical data and equipment:
The vertical saw blade can be tilted up to 45° via a worm drive with a crank handle. The horizontal saw blade can be adjusted in height and depth via column guides precise ball bearing guide of the tool carrier on hardened and grounded steel shaftssturdy cast iron construction manual feed.

Universal notching machine for the aluminum construction..


Technical data and equipment:
Both sawblades can be swivelled within the range of +/-45° via a worm drive with a crank handle. Vertical sawblade diameter 450mm, horizontal saw blade 400mm diameter depth of cut: 153mm, notching depth: 128mm, notching width: 250mm.

Automatic notching machine with hydro-pneumatic sawing unit feed and stationary profile support.


Technical data and equipment:
Vertical saw blade with a diameter of 550mm can be swivelled +45 ° / -60 °.
Horizontal saw blade with a 500 mm diameter can be swivelled + / - 60 °.
The vertical sawblade has 550 mm diameter, the horizontal sawblade 500 mm in diameter.
Cutting height: 210 mm, cutting depth: 185 mm.

Designed and constructed for the cutting of aluminium and PVC profiles.


Technical data and equipment:
Material length of 3 - 6 m. Equipped with a fixed left-hand cutting unit and a mobile right-hand cutting head. Industrial PC for storing of cutting lists Optional with a label printer.

Designed and constructed for the cutting of aluminium, wood and PVC profiles.


Technical data and equipment:
Material length of 3 - 6 m. Mobile right-handed cutting head. Pneumatic driven saw-blade.

Especially suitable for Aluminum and PVC profiles.


Technical data and equipment:
Off-square unit let's you cut angles of + / - 45 °. Optional with a hydro-pneumatic powered cutting head and pneumatic vise.

Particular care has been taken over the safety measures.


Technical data and equipment:
The cutting angle can be set to between 0 and 67,5 ° on both, left and right. 7 fixed stops. Horizontal and vertical pneumatic vises. Optional also with side supporters.

for small Aluminum and PVC profiles.


Technical data and equipment:
Maximum depth of cut at 90° 140 mm, maximum length of cut 100 mm and 85 mm
Weight: only 20 kg (44lbs).